Wow, there are a lot of bridges here... one second please.
Wow, there are a lot of bridges here... one second please.
Why did the truss bridge break up with the beam bridge? It needed more support.
over BUCKS HORN BROOK
0.1 MI N OF JCT RI 117
Parametric wireframe generated from real NBI dimensions. Drag to rotate, scroll to zoom.
Loading 3D model...
This bridge has a Poor overall condition rating of 2 out of 9. This bridge is classified as being in poor condition, meaning one or more structural components have significant deterioration. Poor condition does not mean the bridge is unsafe to drive on, but it does mean repairs or replacement may be needed.
The bridge carries 42 vehicles per day and is 56 years old (reconstructed in 2000).
Its sufficiency rating of 20.9 places it below the national average of 63.6.
For travelers with bridge anxiety
This bridge may cause some awareness for travelers with bridge anxiety, but has manageable characteristics.
This bridge is 36 feet long — a quick crossing, under 5 seconds at highway speed.
A standard overpass design with solid barriers on each side.
No height data available — likely a standard overpass height.
Only about 42 vehicles cross daily — very light traffic with low congestion risk.
The deck is 16 feet wide — a very narrow, single-lane crossing.
This bridge crosses over water. Focus on the road ahead — the water is far below.
This comfort score is designed to help individuals with bridge anxiety plan their travel. All bridges in the National Bridge Inventory are regularly inspected and deemed safe for travel. This is not medical advice — if you experience severe anxiety, please consult a healthcare professional.
Year Built
1970
56 years old (rebuilt 2000)
Structure Type
Steel (Continuous) Stringer/Multi-beam/Girder
Total Length
36 ft
11.1 m
Deck Width
16 ft
4.9 m
Spans
2
sections between supports
Max Span
18 ft
longest unsupported section (5.6 m)
Traffic Lanes
1 lane
Daily Traffic
42vehicles/day
41.69915°N, 71.74626°W
Steel (Continuous) Stringer/Multi-beam/Girder
A steel stringer bridge uses parallel steel beams (stringers) to support the deck. This is one of the most common bridge types in the US, valued for its simplicity and strength.
Learn more about this bridge typeNo ratings yet. Be the first to rate this bridge!
Sign in and track Rhode Island to receive alerts when new inspection data is published. Premium members get bridge-specific notifications.
Data from the National Bridge Inventory (NBI), maintained by the Federal Highway Administration (FHWA).
Data year: 2025. Conditions may have changed since the last inspection.
This information is provided for educational and informational purposes only. It should not be used as the sole basis for any decisions related to bridge safety or transportation planning. Always consult official sources and local authorities for the most current data.