If I had a dime for every bridge I've crossed, I'd have about ten bucks by now.
If I had a dime for every bridge I've crossed, I'd have about ten bucks by now.
Why did the truss bridge break up with the beam bridge? It needed more support.
over MILL GUT TIDAL INLET
1.3 MI W OF JCT RI 114
Parametric wireframe generated from real NBI dimensions. Drag to rotate, scroll to zoom.
Loading 3D model...
This bridge has a Poor overall condition rating of 3 out of 9. This bridge is classified as being in poor condition, meaning one or more structural components have significant deterioration. Poor condition does not mean the bridge is unsafe to drive on, but it does mean repairs or replacement may be needed.
The bridge carries 2,700 vehicles per day and is 59 years old.
Its sufficiency rating of 42.1 places it below the national average of 63.6.
For travelers with bridge anxiety
This bridge may cause some awareness for travelers with bridge anxiety, but has manageable characteristics.
This bridge is 93 feet long — a quick crossing, under 5 seconds at highway speed.
A standard overpass design with solid barriers on each side.
No height data available — likely a standard overpass height.
About 2,700 vehicles cross daily — light traffic, a smooth crossing.
The deck is 37 feet wide with 2-3 lanes — moderate width.
This bridge crosses over water. Focus on the road ahead — the water is far below.
This comfort score is designed to help individuals with bridge anxiety plan their travel. All bridges in the National Bridge Inventory are regularly inspected and deemed safe for travel. This is not medical advice — if you experience severe anxiety, please consult a healthcare professional.
Year Built
1967
59 years old
Structure Type
Prestressed Concrete Stringer/Multi-beam/Girder
Total Length
93 ft
28.2 m
Deck Width
37 ft
11.3 m
Spans
1
sections between supports
Max Span
88 ft
longest unsupported section (26.8 m)
Traffic Lanes
2 lanes
Two-way traffic
Daily Traffic
2,700vehicles/day
41.68179°N, 71.29909°W
Prestressed Concrete Stringer/Multi-beam/Girder
A prestressed concrete stringer bridge uses pretensioned concrete beams, where steel tendons are stretched before concrete is poured. This creates stronger, lighter spans.
Learn more about this bridge typeNo ratings yet. Be the first to rate this bridge!
Sign in and track Rhode Island to receive alerts when new inspection data is published. Premium members get bridge-specific notifications.
Data from the National Bridge Inventory (NBI), maintained by the Federal Highway Administration (FHWA).
Data year: 2025. Conditions may have changed since the last inspection.
This information is provided for educational and informational purposes only. It should not be used as the sole basis for any decisions related to bridge safety or transportation planning. Always consult official sources and local authorities for the most current data.