Why did the truss bridge break up with the beam bridge? It needed more support.
Why did the truss bridge break up with the beam bridge? It needed more support.
Fun fact: The average American crosses 4 bridges a day without even noticing.
over COTTONWOOD RIVER
1.5E 1.0N OF CLEMENTS
Parametric wireframe generated from real NBI dimensions. Drag to rotate, scroll to zoom.
Loading 3D model...
This bridge has a Poor overall condition rating of 4 out of 9. This bridge is classified as being in poor condition, meaning one or more structural components have significant deterioration. Poor condition does not mean the bridge is unsafe to drive on, but it does mean repairs or replacement may be needed.
The bridge carries 45 vehicles per day and is 42 years old.
Its sufficiency rating of 48.6 places it below the national average of 63.6.
For travelers with bridge anxiety
This bridge may cause some awareness for travelers with bridge anxiety, but has manageable characteristics.
This bridge is 240 feet long — a short crossing, about 10-15 seconds.
A standard overpass design with solid barriers on each side.
No height data available — likely a standard overpass height.
Only about 45 vehicles cross daily — very light traffic with low congestion risk.
The deck is 26 feet wide with 1-2 lanes — a narrower crossing.
This bridge crosses over water. Focus on the road ahead — the water is far below.
This comfort score is designed to help individuals with bridge anxiety plan their travel. All bridges in the National Bridge Inventory are regularly inspected and deemed safe for travel. This is not medical advice — if you experience severe anxiety, please consult a healthcare professional.
Year Built
1984
42 years old
Structure Type
Steel (Continuous) Stringer/Multi-beam/Girder
Total Length
240 ft
73.2 m
Deck Width
26 ft
8.0 m
Spans
3
sections between supports
Max Span
92 ft
longest unsupported section (28.0 m)
Traffic Lanes
2 lanes
Two-way traffic
Daily Traffic
45vehicles/day
38.31536°N, 96.70749°W
Steel (Continuous) Stringer/Multi-beam/Girder
A steel stringer bridge uses parallel steel beams (stringers) to support the deck. This is one of the most common bridge types in the US, valued for its simplicity and strength.
Learn more about this bridge typeNo ratings yet. Be the first to rate this bridge!
Sign in and track Kansas to receive alerts when new inspection data is published. Premium members get bridge-specific notifications.
Data from the National Bridge Inventory (NBI), maintained by the Federal Highway Administration (FHWA).
Data year: 2025. Conditions may have changed since the last inspection.
This information is provided for educational and informational purposes only. It should not be used as the sole basis for any decisions related to bridge safety or transportation planning. Always consult official sources and local authorities for the most current data.